movw-0x16.cf


Raspberry Pi3B & movw-space

Wed. Oct 05, 11:03PM, 11 months and 3 weeks ago

So I bought a RPi3B last week and I decided, since puush.me, was becoming really laggy, and I had several HDD’s lying around I’d make a file hosting/storage website; I didn’t really want to spend a long time learning a new language, since I’ve never dealt with dynamic languages like PHP or node.js before, so I looked around and found NodePomf, I forked it and made my edits, it only took me a few hours over 2 days to get it running / customized to my likings, I think I have a little site congruency going since all assets (background/fonts/CSS) are pulled from the MTP section of this site.

Anyway enough blabbing here it is: movw-space.cf

The setup is as follows below, I didn’t want to run a dedicated PSU, so I used a USB hub I had a lying around which provided 5V 1A to each port, which is just about enough for a HDD. I use a SATA-USB adapter, which gives me about 60mb/s since the USB2.0 on the RPi are the bottleneck, I put them in RAID0 so I have a backup (sorta) and 4x RW speed; which ideally would be about 240mb/s.

	  HDD01  HDD02  HDD03  HDD04 } RAID0
	  500GB  500GB  500GB  500GB } 5V, 0.8~ A

	  +---+  +---+  +---+  +---+
	  |{s}|  |{s}|  |{s}|  |{s}|
	  |   |  |   |  |   |  |   |
	  +-*-+  +-*-+  +-*-+  +-*-+
	    |      |      |      |
	  +-*-+  +-*-+  +-*-+  +-*-+ SATA/USB adapter
	  |   |  |   |  |   |  |   |
	  |   |  |   |  |   |  |   |
	  |   |  |   |  |   |  |   |
	  |   |  |   |  |   |  |   +---+
	  |   |  |   |  +   +--+-----+ |
	  |   |  |   +--+------+---+ | |
	  |   +--+------+------+-+ | | |
	  | +----+      |      | | | | |
	  | | +---------+      | | | | |
	  | | | +--------------+ | | | |
	  | | | |   USB 2.0      | | | |
	+-*-*-*-*-+            +-*-*-*-*-+
	|         |            | 5V      |
	|         +            | 1A/each +---< AC
	+---------+            +---------+
	Raspberry Pi           4-Port Hub

Return

Submit a comment

?